AB Soft ATX 12V - Manual (Page 18)

Hardware Installation SY- P4I865PE Plus DRAGON 2
13
Chapter 2
HARDWARE INSTALLATION
Congratulations on your purchase of SY-P4I865PE Plus DRAGON 2
Motherboard. You are about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket mPGA478 processor with built-in CPU cooling fan. (CPUs with
Vcore higher than 1.6 volts are not supported)
2. DDR RAM memory module(s)
3. Computer case and chassis with adequate power supply unit (350W for a
minimally loaded system or 400W for a fully loaded system).
4. Monitor
5. Keyboard
6. Pointing Device (mouse)
7. Disk Drives: HDD, CD-ROM, Floppy drive…
8. External Peripherals: Printer, and Modem- (optional)
9. VGA Card (AGP or PCI)
Note: This M/B only supports 1.5V AGP VGA cards! 3.3V AGP cards
are not supported.