AB Soft ATX 12V User Manual
Page 34
Hardware Installation
SY- P4I865PE Plus DRAGON 2
29
5. Universal Serial Bus (USB1/USB2, USB3/USB4, USB20_1/USB20_2)
This Motherboard provides 8 USB 2.0 ports for your additional devices.
Plug the USB device jack into the available USB connector USB1, USB2,
USB3 and USB4.
USB20_1 and USB20_2 are available. To make use of these USB ports,
purchase a USB cable from your dealer. The lay-out of USB20_1/USB20_2
connector is as follows:
6. Onboard Audio Speakers connections
When using 2-channel speaker, connect the speaker cable to line-out.
If you’re using 4 channel speaker, connect the front L/R speakers to
line-out and rear L/R speakers to Line-in. make sure to set the Audio
Rack software for 4 channel speaker system. Do not forget to set the Audio
Rack software to 4-channel system.
If you are using 6 channel speaker, connect the front L/R speaker to line
out, rear L/R speaker to line-in and center/Bass speaker to Mic-in, make
sure to set the Audio Rack software to 6 channel speaker system.
1
6
10
2
7
3
8
4
5
9
GND
(+)Data
(-)Data
Power
GND
GND
(+)Data
(-)Data
Power
Line-in
Line-out
Mic-in