AB Soft ATX 12V - Manual (Page 26)

Hardware Installation SY- P4I865PE Plus DRAGON 2
21
Note: IDE2 and SATA2 are not bootable, SATA1 and IDE1 are bootable.
Note: Only Windows XP can use SATA1, SATA2, IDE1 and IDE2 at the
same time. All other operating systems can use any combination from
the following table:
Parallel ATA connectors
Connect the black end of the ATA66/100 flat cable to the IDE device (HDD
or CD-ROM) and plug the blue end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the Motherboard. The
ATA66/100 cable is backward compatible with ATA33 HDDs.
Enabled devices
1 SATA1 SATA2 IDE1
2 SATA1 SATA2 IDE2
3 IDE1 IDE2
4 SATA1 SATA2
These devices can be enabled in your CMOS setup menu. Please check the
OnChip IDE Device paragraph on page 50 for more details.
1
1
39
39
40-pin
ATA 66/100
Flat Cable
80-Conductor