AB Soft ATX 12V - Manual (Page 72)

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2
67
3-5.2 SuperIO Device
Caution: Change these settings only if your are already familiar
with the Chipset.
The [SuperIO Device] option changes the values of the Super I/O controller.
The following screen shows setup default settings.
Phoenix – Award BIOS CMOS Setup Utility
SuperIO Device
POWER ON Function BUTTON ONLY
x KB Power ON Password Enter
Item Help
x Hot Key Power ON Ctrl-F1
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
x UR2 Duplex Mode Half
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
x ECP Mode Use DMA 3
PWRON After PWR-Fail OFF
Game Port Address 201
Midi Port Address 330
Midi Port IRQ 10
Menu Level 
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.