AB Soft ATX 12V - Manual (Page 45)

Hardware Installation SY- P4I865PE Plus DRAGON 2
40
Step1.
Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step2.
Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the
prompt to load the BIOS optimal setup.
Step3.
Select [SOYO COMBO FEATURE]
Set the [CPU Frequency Select] field to “Manual”, to be able to change the
CPU frequency 1 MHz stepping.
Step4.
Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.