A&D WM:PD4000136 Ambulatory Blood Pressure Monitor - Manual (Page 12)

Page 10
Functions and Specifications Specifications
Performance specifications
Measurement method Oscillometric
Pressurization Display range 0 ~ 320 mmHg
Interval measurement 85 ~ 300 mmHg (Fitted)
Manual measurement 185 mmHg (Fixed)
Measurement range Systolic Blood Pressure 60 ~ 280 mmHg
Diastolic Blood Pressure 40 ~ 160 mmHg
Pulse rate 30 ~ 200 bpm
Accuracy Pressure
±
3 mmHg
Blood pressure Conforming to 1992 AAMI standard
(
±
3 mmHg or
±
2% measurement whichever is greater)
Pulse rate
±
5 %
Minimum display division Pressure 1 mmHg
Pulse rate 1 bpm
Measurement Automatic measurement
Manual measurement
Number of measurements Apporx. 180 (Actual measurement number may vary
due to environment and capacity of batteries)
Memory Up to 300 sets of data
Normal Clock
Display During a measurement Pressure value
After a measurement SYS, DIA and pulse rate
Error code, function of concealing the measurement data
Clock 24-hours (1997~2096 year, automatic leap year setting)
Batteries 3 x Alkaline battery (type LR6, type AA) or
3 x Ni-Cd battery (type AA)
Type of protection Internally powered equipment type BF
against electric shock
CE Marking The label of the medical device
by the EC directive.
0366
C-Tick Marking The certification trade mark registered
to the ACA by the Trademark office.
AAMI : Association for the Advancement of Medical Instrumentation
ACA: the Australian Communications Authority
CE marking and C-Tick marking are labeled only where they are required.
N92