A&D WM:PD4000136 Ambulatory Blood Pressure Monitor - Manual (Page 25)

Page 23
Initializing the recorder Attaching the Cuff and Recorder
Preparation of the Carrying Case
❏ Use the belt or shoulder band to attach the carrying case.
❏ We recommend the belt be used for added stability.
Using the Belt
Step 1 Insert the belt into the hole of
the carrying case.
Step 2 Pull the belt from the hole of
the carrying case.
Step 3 Pass the belt through the ring.
Step 4 Thread the belt through the
front-hole and the rear-hole
of the hook.
Step 5 Insert the belt to the ring again.
Example
Hook
Step 4
Step 5
Front-hole
Rear-hole
Belt
Step 2
Step 3
Ring
Step 1
Carrying case
Using the Shoulder Band
Step 1 Insert the band into the buckle.
Step 2 Pass the belt through the ring.
Step 3 Thread the belt through the
buckle. See illustration on right.
Buckle
Step 1
Step 2
5
Step 3
Example