A&D WM:PD4000136 Ambulatory Blood Pressure Monitor User Manual
Page 19
Page 17
Initializing the recorder
Selection for the Automatic Measurement
Steps for automatic measurement
ex.
First block
0
8:00 ~ 21:59
frequency is 30 minutes
Second block
22:00 ~
0
5:59
frequency is 60 minutes
Third block
0
6:00 ~
0
7:59
frequency is 10 minutes
START STOP
START STOP
START STOP
START STOP
START STOP
START STOP
AUTO ON/OFF
AUTO ON/OFF
AUTO ON/OFF
AUTO ON/OFF
AUTO ON/OFF
AUTO ON/OFF
To next page
Step 1
Press and hold the
START STOP
key for approx. 3 seconds.
The current mode is displayed.
Step 2
Press the
AUTO ON/OFF
key so as to display
for
mode III.
Step 3
Press the
START STOP
key. The mode is stored and the current
start time of the first block is displayed.
Step 4
Press the
AUTO ON/OFF
key so as to display "8" for 8:00 hours
as the start time of the first block.
Step 5
Press the
START STOP
key. The current frequency for the first
block is displayed.
Step 6
Press the
AUTO ON/OFF
key so as to display "30" for 30
minutes as the frequency for the first block.
Step 7
Press the
START STOP
key. The current start time of the
second block is displayed.
Step 8
Press the
AUTO ON/OFF
key so as to display "22" for 22:00
hours as the start time for the second block.
Step 9
Press the
START STOP
key. The current frequency for the
second block is displayed.
Step10
Press the
AUTO ON/OFF
key so as to display " " for 60 minutes
as the frequency of the second block.
Step11
Press the
START STOP
key. The current start time of the third
block is displayed.
Step12
Press the
AUTO ON/OFF
key so as to display "6" for 6:00 hours
as the start time of the third block.