AEG AR 4021 BT - Manual (Page 88)

88 ENGLISH
Press and hold ‹ */+ / AS/PS (21). SEARCH is displayed.
The unit starts automatic search. When a station is
found (by the scan function), it will be played for a
few seconds before the scan of the next station. The
respective preset flashes.
Press one of the numeric buttons (8) to access the ‹
respective station.
Cycle Through Saved Stations
Press ‹ */+ / AS/PS (21). All stations are briefly played in
sequence.
Press ‹ */+ / AS/PS (21). When the desired station comes
up. This station stays tuned into.
Alternative Frequencies (AF)
AF is an RDS (Radio Data System) function and is only
available for FM stations. The unit searches in the back-
ground the best frequency for the selected station.
Press the ‹ AF/MON button (22) to turn this function on
or off.
AF is displayed: Function is activated and RDS information
is received.
AF flashes: No RDS information is received.
AF is not displayed: Function is deactivated.
Program Type (PTY)
Some FM stations transmit besides the station name also
the program type.
You can search for stations with certain genres.
Press the button ‹ PTY (17).
Select the desired PTY code by pressing the ‹ / but -
tons (23). The PTY genre is displayed.
Such program types may be for example:
SPORT NEWS POP M CLASSICS
After selecting a PTY code press the button (23). PTY
SEEK is shown on the display. The unit searches for sta-
tions which correspond to the set PTY code and stops if a
corresponding station has been found. If no station with
the respective PTY genre is found, PTY NONE is displayed.
The PTY function is deactivated if the selected PTY genre
is no lon-ger received. Or press the button PTY (17) to end
the function early.
Traffic Announcement (TA)
Hold down the ‹ EQ/TA (19) button to switch this mode
on or off. TA is displayed with activated mode.
In the TA mode, switching from any other operation
mode is done immediately to a radio station sending
traffic announcements at that time. TRAFFIC is shown
on the display. The volume level is adjusted to the
value set in the menu for the transmission of traffic
information.
Briefly hold down the ‹ EQ/TA (19) button during
playback of traffic radio to interrupt the TA function
without switching the function off.
General CD Functions
Anti-shock Function (ESP - Electric Shock Protection)
The unit is equipped with anti-shock function. This func-
tion compensates for bumps on uneven streets and ensure
uninterrupted playback.
Insert and Remove CD
Press the release button (1) to flip down the control ‹
panel.
Insert the CD with the label up into the CD drive Flip ‹
the control panel back up. The display shows CDP
PLAY . CD playback starts.
To eject the CD, press the ‹ (28) button when the
control panel is flipped down. The CD is ejected. The
unit switches to Radio mode.
Remove the CD from the drive. The CD will be retracted ‹
again after 10 seconds if it is not removed from the
slot; in this case playback does not start automatically.
NOTE
Please note: ►
A large variety of burner and compression software
is on the market; there are differences in quality
between CDs and home-burnt CDs.
Furthermore, the music industry does not have fixed
standards (copy protection).
For this reason it can happen that in exceptional
cases play-back problems for CDs and MP3/WMA CDs
occur. This is not a malfunction of this unit.
Select CD Mode (with CD inserted)
Repeatedly press ‹ PAIR/MOD (4) until CDP PLAY is
displayed.
Skip Mode
Press ‹ (23) or (23), to skip to the next or previous
track. The title number and the elapsed playing time
are shown on the display.
Fast Forward/Rewind
Press and hold ‹ (23) or (23) to start fast forward or
rewind function.
Pause
Press ‹ PAU (9), to pause playback. S-PAUSE is shown on
the display.
Press ‹ PAU (9) again to resume playback.
Repeat Mode
Press ‹ RPT (11) to repeat the current title. S-RPT and
the current title are displayed. Press again to return to
normal playback mode.
Only for MP3 files and CDs in MP3 Format: ‹
Keep the RPT button (11) briefly pressed to repeat the
current folder. D-RPT and the current title are shown.
Press the button to restore normal playback.