Olympus WS-823 - Manual (Page 39)

3
Pla
yback
39
EN
Playback
3 Press the
`OK button.
Playback speed/
tone indicator
TIP
• When speech is still difficult to discern
after changing the playback speed,
changing the tone may help.
• When the speed/tone changing
function and [Play Scene] function
have both been selected, the [Play
Scene] setting takes precedence.
The [Play Scene] settings cannot be
changed (
☞ P.74).
• When changing the playback speed/
tone, playback operations such as
stopping playback, skipping to the
beginning of a file, and writing index
marks/temp marks are the same as
during standard playback.
NOTE
• Altered playback speed/tone settings
are retained even after power OFF.
• Changing the playback speed and tone
will make the battery deplete more
quickly.
• The function below cannot be used
when changing the playback speed/
tone.
• [Noise Cancel] (
☞ P.70)
Fast playback restrictions
Depending on their sampling frequency and
bit rate, some files may not play normally.
In this case, you will need to reduce the
playback speed.