Olympus WS-823 - Manual (Page 52)

4
Listening to F
M
radio
52
EN
Listening to FM radio
Selecting the reception mode
Different reception modes can be selected to match different reception conditions. If the radio
station you want to listen to has a signal too weak to be detected by the automatic preset
process, you can select manual reception to adjust the radio frequency manually.
1 Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “ Presetting
radio stations automatically”
(
☞ P.49).
2 Press the F2 button to select the
desired reception mode.
TIP
• When a radio station has been
preset (
☞ P.49), the voice
recorder switches between preset
mode and frequency mode each
time you press the F2 button.
• You cannot select preset mode if
no radio stations have been preset.
3 Press the
9 or 0 button to
change the reception mode.
a
b
• Pressing the
9 or 0 button lets
you select preset radio stations (by
preset number).
a Preset number
Preset mode
• Press the
9 or 0 button to adjust
the FM radio frequency being received
(manual reception).
• Press and hold the
9 or 0 button
to scan to the next radio station found
(auto reception).
b Frequency being received
• When the frequency of a non-preset
radio station is being received, pressing
the F2 button switches to the preset
station nearest in frequency to the
current frequency.
• Reducing the sensitivity used for
scanning can sometimes enable
reception of stations difficult to receive
due to interference or other problems
(
☞ P.81).
Frequency mode (auto reception/manual reception)