Olympus WS-823 - Manual (Page 73)

5
Pla
yback menu [Pla
y Menu]
73
EN
Playback menu [Play Menu]
Changing music sound quality
[Equalizer]
The voice recorder’s equalizer settings can
be changed to change music sound quality
as desired.
When [User] was selected
1 Press the
9 button.
2 Press the
9 or 0 button to
select a frequency band.
• You can set different levels for the
[60 Hz], [250 Hz], [1 kHz], [4 kHz] and
[12 kHz] frequency bands.
3 Press the +/– button to set a
level.
• Levels can be set to values between
[–6] and [+6], in 1 dB increments.
• Increasing a level setting emphasizes
the corresponding frequency band.
• To change another frequency band,
repeat Steps 2 and 3 .
NOTE
• [Equalizer] is only enabled in [Music]
mode.
Setting a skip space
[Skip Space]
The [Skip Space] function lets you skip
a preset amount forward (forward skip)
or backward (reverse skip) in a file during
playback. It is handy for quickly moving the
playback position, or for repeated playback of
a short segment.
1 Press the +/– button to select
[Forward Skip] or [Reverse Skip].
[Forward Skip]:
Starts playback after moving the
playback position forward by the set
amount.
[Reverse Skip]:
Starts playback after moving the
playback position backward by the set
amount.
2 Press the +/– button to select a
setting.
When [Forward Skip] was selected:
[File Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip], [10 min.
Skip]
When [Reverse Skip] was selected:
[File Skip], [1 sec. Skip] to [3 sec. Skip],
[5 sec. Skip], [10 sec. Skip], [30 sec.
Skip], [1 min. Skip], [5 min. Skip]