Olympus WS-823 - Manual (Page 95)

6
PC connec
tion/disconnec
tion
95
EN
Connecting the voice recorder to a PC
1 Start the PC.
2 Slide the USB connector slide
lever in the direction of the
arrow.
• The USB connector extends out. The
USB connector cover is stored inside
the voice recorder.
3 After making sure the voice
recorder is in stop mode, connect
its USB connector to a USB port
on the PC.
• [Remote (Storage)] appears in the
voice recorder’s display when the USB
connector is connected.
• The voice recorder will not connect to
the PC if [AC Adapter] was selected for
the voice recorder’s [USB Connection]
setting. Select [PC] for the [USB
Connection] setting (
☞ P.89).
TIP
• Windows: The voice recorder is
recognized and displayed in the [My
Computer] folder with the model
name as the drive name. If there is a
microSD card in the voice recorder, it
can be used as the [Removable Disk ].
• Macintosh: The voice recorder is
recognized and displayed on the
desktop with the model name as the
drive name. If there is a microSD card
in the voice recorder, [Untitled] is
displayed.
• For information on the PC’s USB port,
see the PC’s user manual.
• Use the USB extension cable provided if
needed (only for WS-823 model).
NOTE
• The voice recorder must not be in
HOLD mode.
• Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
• Connecting the voice recorder through
a USB hub may result in unstable
operation. Do not use a USB hub if
operation is unstable.
• Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if another manufacturer’s
cable is used. Only use the Olympus
USB extension cable with the voice
recorder and never use it with another
manufacture’s products.
PC connection/disconnection