Olympus WS-823 - Manual (Page 66)

5
66
EN
Recording menu [Rec Menu]
Recording menu [Rec Menu]
Adjusting the voice activation level for
voice-activated recording
1 Press the REC (
s) button to start
recording.
• Recording pauses automatically
about 1 second after the input
sound becomes quieter than the set
activation sensitivity.
The blinking message [Standby]
appears in the display. The LED
indicator light becomes lit when
recording is activated and flashes
when recording is paused.
2 Press the
9 or 0 button to
adjust the voice activation level.
a
b
a Voice activation level (moves left/
right to match set level)
b Level meter (changes in proportion
to recording sound volume)
• The setting can be adjusted to
between [01] and [23].
TIP
• Increasing the setting number
increases the VCVA activation
sensitivity, enabling quieter sounds to
activate the start of recording.
• Adjust the VCVA voice activation level
to suit the recording conditions (to
cope with high levels of surrounding
noise or the like).
• To avoid recording mistake, it’s
recommended to perform a test
recording beforehand to adjust the
voice activation level.
WS-823 model only:
• To change the recording level
(
☞ P.63) during VCVA recording in
[Manual], press the F1 button. The
voice recorder changes to recording
level adjustment mode. Press the
F1 button again to return to voice
activation level adjustment mode.
NOTE
• The following function is disabled
when using the [VCVA] function:
• [V-Sync. Rec] (
☞ P.67)