Olympus DS-5000ID - Manual (Page 21)

21
1
Using the AC Adapter
Using the
AC Adapter
Use the AC adapter (included) in cases
where battery consumption is a concern,
such as when recording for extended
periods of time.
Plug the AC adapter (included) into a
household power outlet and
connect the power plug to the recorder’s
power connector (DC 5V). Always turn off
the recorder before you connect power.
Refer to P.18-19 regarding supplying power
to the recorder and cradle with the aim of
charging the Ni-MH Rechargeable Battery
Pack (
☞ P.16).
If the recorder detects a DC power
voltage outside of the allowable voltage
(allowable voltage: 4.6 to 5.5 V), then
[Power Supply Error Remove Power
Plug] will appear on the display and all
operations will stop. The recorder will
not be operable while abnormal voltage
is detected. Use the included AC
adapter.
Detecting abnormal voltage
Warning
• Always stop recording before
connecting or disconnecting
power.
• When the AC adapter is not in use,
disconnect the power supply plug
from the power outlet.
• Use only the correct power supply
voltage as indicated on the
adapter.
AC
connector
The plug type varies
depending on the country
where sold.
AC adapter
AC cable
Power Supply
Error
Remove
Power Plug