Olympus DS-5000ID - Manual (Page 25)

25
1
• You can choose the order of the year, month,
day by pressing the F2(D/M/Y or Y/M/D or M/
D/Y)* button while setting them.
Example: January 14, 2008
(Initial setting)
*The display will vary depending on the status of the
settings.
3 Press the OK/MENU button to
complete the setup screen.
The clock will start from the set date and time.
Press the OK/MENU button according to the time
signal.
Changing the Time and Date
When the recorder’s POWER switch is turned
ON the [Time & Date] will be displayed for two
seconds. If the time and date is not correct,
set it using the procedure below.
1 Press the
+
or
–
button in the [Device
Menu] screen, then select [Time & Date].
See P.42 regarding the menu.
2 Press the OK/MENU or 9 button.
The time and date screen appears. The hour
indicator flashes, indicating the start of the time
and date setup process.The following steps are
the same as Step 1 through Step 3 of “Setting
Time and Date (Time & Date)” (
☞ P.24).
3 Press the F1(BACK) or 0 button to
return to the [Main Menu] screen, then
press the
F3(EXIT) or 0 button to
complete the setting.
Setting T
ime and Date
1 M 14 D 2008 Y
14 D 1 M 2008 Y
2008 Y 1 M 14 D
BACK EXIT
Device Menu
USB Class
12
Time & Date
Power Save
Reset Settings
Card Info.
System Info.
Setting Time and Date (Time & Date)
Notes
• If the slide switch is moved to a position other than STOP
while setting the time and date, the time and date currently
being set (un-finalized time and date) will be cancelled
and it will revert to the previously set time and date.
• You can set the time and date from your PC using DSS
Player software ( ☞ P.69).