Olympus DS-5000ID - Manual (Page 74)

74
4
Connecting Recorder to PC
Connecting Recorder to PC
Connecting to Your PC Using the USB Cable
1 Turn ON the recorder (
☞ P.22).
2 Connect the USB cable to the USB port of the PC.
3 Confirm that the recorder has stopped and connect a USB
cable to the connection port on the recorder.
If [Remote] is displayed on the recorder, it indicates proper connections.
Once you connect the recorder to your PC, the recorder will be powered through
the USB cable. When the AC adapter is connected power will be supplied from
the AC adapter.
While PC connection, the SD card and the microSD card are recognized as the
respective separate removable disk drive. Furthermore, removable disk drive is
added in order of the microSD card and the SD card.
Supported computers
Notes
• NEVER remove the card or disconnect the USB cable while the record/play indicator
light is flashing. If you do, the data on the card will get destroyed.
• Some PC’s may not supply sufficient power and the recorder fails to connect. Refer
to your PC User’s Manual regarding the USB port on your PC.
• Do not connect the recorder to a PC by using a USB hub. Make sure to connect to
a USB port on your PC.
• Make sure to push the cable connector all the way in. Otherwise, the recorder may
not operate properly.
• This is an operational environment for saving the files recorded by this recorder to
your PC with USB connection.
• Even if operational environment is satisfied, we do not support upgraded OS, the
multi-boot environment and self-modified computers.
Windows 2000/XP/Vista
Windows computers equipped with more than
one free USB port.
Mac OS 10.3.9 - 10.5
Apple Macintosh series equipped with more
than one free USB port.
Macintosh
Windows
Operating System:
Supported computers:
Operating System:
Supported computers: