Olympus DS-5000ID - Manual (Page 26)

26
1
Setting Recording Destination (Card Select)
Setting Recording Destination
By default, the recording destination is set to
the [SD] at the factory. To change the recording
destination, follow the procedure outlined
below.
1 Select [Card Select] at the [Device Menu]
screen, then press the
OK/MENU or
9 button.
Refer to P.42 regarding each menu item settings.
2 Press the
+
or
–
button to select [SD]
or [micro SD].
3 Press the OK/MENU button to
complete the setup screen.
[SD Card Selected] or [microSD Card Selected]
will light up on the display, and it will return to the
[Device Menu] screen.
If press the 0 or F1(BACK) button the setting
will be cancelled and it will return to the [Device
Menu] screen.
The recording destination (
or ) that was
set will appear on the display.
4 Press the F1(BACK) or 0 button to
return to the [Main Menu] screen, then
press the
F3(EXIT) or 0 button to
complete the setting.
BACK EXIT
Device Menu
Fingerprint
12
Card Select
Beep
Format
USB Class
Time & Date
BACK EXIT
Card Select
SD
microSD Card
Selected
mSD
BACK EXIT
Card Select
SD
micro SD mSD
F1, F3 button
OK/MENU,
+
,
–
,
9, 0
button