Pioneer AVIC-F310BT - Manual (Page 49)

You can sort the traffic information in alpha-
betical order.
!
:
You can sort the traffic information accord-
ing to the incident.
The list will be sorted in the order of closed/
blocked roads, traffic jam, accidents, road
works and others.
Current order is displayed on the upper right of
the screen.
# Touch [Refresh].
When new traffic information is received, current
information is changed or old information has
been removed, the list is updated to reflect the
new situation.
# Touch
.
Touching allows you to check the location on a
map. (Traffic information without positional infor-
mation cannot be checked on a map.)
4 Touch .
Return to the previous screen.
Checking traffic
information on the route
All traffic information on the current route is
displayed on screen in a list.
% Touch [Traffic On Route].
The
“Traffic On Route List” screen appears.
The method for checking the content dis-
played on the screen is the same for
“Checking
all traffic information
”.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
p A line is displayed only when the map scale
is 5 km (2.5 miles) or lower.
p Icon appears only when the scale on the
map is 20 km (10 miles) or lower. If the
scale is changed, the icons are resized ac-
cording to the selected scale.
Traffic event icon
!
with yellow line:
Stop-and-go traffic
!
with red line:
Stopped traffic
!
with black line:
Closed/blocked roads
!
etc.:
Accidents, constructions, etc.
Setting an alternative
route to avoid traffic jams
The navigation system checks whether or not
there is the traffic information on your route at
regular time intervals. If the navigation system
detects any traffic jams on your current route,
the system tries to find a better route in the
background.
p The following types of traffic incidents on
the route will be checked: slow, queuing
and stationary traffic, and closed/blocked
roads.
Using traffic information
Engb
49
Chapter
10
Using
traff
ic
information