Pioneer AVIC-F310BT - Manual (Page 85)

Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the
“Function Menu” screen.
= For details, refer to Screen switching over-
view on page 76.
2 Turn MULTI-CONTROL to display
“BSM”.
3 Press the centre of MULTI-CONTROL to
start
“BSM”.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys
to in
order of their signal strength. When this is
complete,
BSM stops flashing.
p To cancel the storage process, press the
centre of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the
“Function Menu” screen.
= For details, refer to Screen switching over-
view on page 76.
2 Turn MULTI-CONTROL to display
“Local”.
3 Pressing the centre of MULTI-CONTROL
switches between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are two levels of sensitivity for MW/LW.
MW/LW: Level1 —Level2
p The level “2” setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
Using the radio (MW/LW)
Engb
85
Chapter
16
Using
the
radio
(MW/L
W
)