Pioneer AVIC-F310BT - Manual (Page 79)

Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
(
to ), you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
p Up to 18 stations, 6 for each of three FM
bands can be stored in memory.
2 Touch the same preset tuning key to
.
The radio station frequencies are recalled from
memory.
Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the
“Function Menu” screen.
= For details, refer to Screen switching over-
view on page 76.
2 Turn MULTI-CONTROL to display
“BSM”.
3 Press the centre of MULTI-CONTROL to
start “BSM”.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys
to in
order of their signal strength. When this is
complete,
BSM stops flashing.
p To cancel the storage process, press the
centre of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the
“Function Menu” screen.
= For details, refer to Screen switching over-
view on page 76.
2 Turn MULTI-CONTROL to display
“Local”.
3 Pressing the centre of MULTI-CONTROL
switches between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM.
FM:
Level1
— Level2 — Level3 — Level4
p The level “4” setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
Tuning into alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the navigation system will
automatically search for a different station in
the same network that is broadcasting a stron-
ger signal.
1 Display the
“Function Menu” screen.
= For details, refer to Screen switching over-
view on page 76.
2 Turn MULTI-CONTROL to display
“Alternative FREQ”.
Using the radio (FM)
Engb
79
Chapter
15
Using
the
radio
(FM
)