Using news programme interruption, Searching for an rds station by pty, Information – Pioneer AVIC-F310BT User Manual

Page 81: Searching for an rds station by pty information, Using the radio (fm)

Advertising
background image

3

Turn MULTI-CONTROL to display

“Traffic Announce”.

4

Pressing the centre of MULTI-CONTROL

switches between

“On” and “Off”.

p You can also cancel the announcement by

changing the source or moving

MULTI-

CONTROL to the left or right.

5

Press BAND/ESC while a traffic an-

nouncement is being received to cancel the
announcement.
The tuner returns to the original source but re-
mains in standby mode until turning the traffic
announcement standby off.

p Pressing SRC/OFF button enables you to

perform the equivalent operation.

p The system switches back to the original

source following traffic announcement re-
ception.

p Only TP stations and other enhanced net-

works

’ TP stations are tuned in during seek

tuning or BSM when

TA is on.

Using news programme
interruption

When a news programme is broadcast from a
PTY code news station, the navigation system
can switch from any station to the news broad-
cast station. When the news programme
ends, reception of the previous programme re-
sumes.

1

Display the

“Function Menu” screen.

= For details, refer to Screen switching over-

view on page 76.

2

Turn MULTI-CONTROL to display

“News Interrupt”.

3

Pressing the centre of MULTI-CONTROL

switches between

“On” and “Off”.

p A news programme can be cancelled by

pressing

BAND/ESC or SRC/OFF button.

Searching for an RDS
station by PTY information

You can search for general types of broadcast-
ing programmes.
= For details, refer to PTY list on page 83.

1

Display the

“Function Menu” screen.

= For details, refer to Screen switching over-

view on page 76.

2

Turn MULTI-CONTROL to display

“PTY Search”.

3

Press MULTI-CONTROL left or right to

select a programme type.
There are four programme types:
News&Information

— Popular — Classics

— Others

4

Press the centre of MULTI-CONTROL to

start

“PTY Search”.

The tuner searches for a station broadcasting
that programme type.

p To stop the search, press the centre of

MULTI-CONTROL.

p The programmes of some stations may dif-

fer from that indicated by the transmitted
PTY.

p If no station is broadcasting the type of pro-

gramme you searched for,

Not Found is

displayed for about two seconds and then
the tuner returns to the original station.

Using the radio (FM)

Engb

81

Chapter

15

Using

the

radio

(FM
)

Advertising