Pioneer AVIC-F310BT - Manual (Page 59)

Dialling a facility
’s phone number
You can make a call to facilities with phone
number data.
p You cannot make a call to locations or POIs
that have no phone number data.
1 Display the
“Navigation Menu” screen.
2 Touch [POI].
The
“POI Search” screen appears.
3 Search for the POI.
The
“POI List” screen appears.
= For details concerning operations, refer to
Searching for Points of Interest (POI) on
page 39.
4 Touch next to the POI that you want
to call.
The
“Detailed POI Information” screen ap-
pears.
5 Touch to make a call.
To cancel the call after the system starts dial-
ling, touch
.
6 Touch to end the call.
Dialling from the map
You can make a call by selecting the icon of a
registered location or a POI icon from the map
screen.
p You cannot make a call to locations or POIs
that have no phone number data.
1 Scroll the map, and place the cursor on
an icon on the map.
2 Touch .
Detailed information is displayed.
3 Touch to make a call.
To cancel the call after the system starts dial-
ling, touch
.
4 Touch to end the call.
Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound once.
If [
Auto Answer Preference] is set to [Off],
answer the call manually. Answering is avail-
able if any screen is displayed, such as the
map screen or the setting screen.
p You can set this navigation system to auto-
matically answer incoming calls.
= For details, refer to Answering a call
automatically on page 62.
1 When a call comes in, the answering
operation menu appears on the screen.
p The registered name appears if the phone
number of the received call is already regis-
tered in
“Contacts”.
p Depending on the caller ID service, the
phone number of the received call may not
be displayed.
“Unknown” appears instead.
2 To answer an incoming call, touch .
Using hands-free phoning
Engb
59
Chapter
11
Using
hands-fr
ee
phoning