Pioneer AVIC-F310BT - Manual (Page 68)

3 Enter the fuel consumption informa-
tion.
Enter the following items:
! [Surface Road]:
Enter the fuel cost when you drive on ordin-
ary roads.
p How the fuel cost is entered depends on
the [ Fuel Unit] setting.
— When [Fuel Unit] is set to [Litre].
Enter how much fuel you need to tra-
vel 100 kilometres (60 miles).
— When [Fuel Unit] is set to [Gallon].
Enter how many kilometres (miles)
you get to a gallon.
! [MW Fuel Mile]:
Enter the fuel cost when you drive on the
motorway.
p How the fuel cost is entered depends on
the [ Fuel Unit] setting.
— When [Fuel Unit] is set to [Litre].
Enter how much fuel you need to tra-
vel 100 kilometres (60 miles).
— When [Fuel Unit] is set to [Gallon].
Enter how many kilometres (miles)
you get to a gallon.
! [Fuel Price/Unit]:
Enter the fuel unit price.
! [Fuel Unit]:
Set the fuel unit.
! [Currency]:
Set the unit of currency.
When all the items are entered, inputting the
fuel consumption information is complete.
Setting the power-saving
function
You can select the setting of the screen back-
light to save the battery power.
1 Display the
“Navigation Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Backlight Timeout].
Each time you touch the key changes that set-
ting.
! [Never]:
Deactivates the power-saving feature of the
screen backlight.
! [30 sec]:
Dims the backlight automatically if you do
nothing for 30 seconds.
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Make sure to use the supplied stylus for ad-
justment and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as a ballpoint
pen or a mechanical pen, which could da-
mage the screen.
Stylus (supplied with the navigation
system)
1 Display the “Navigation Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Calibrate].
A message confirming whether to start the ca-
libration appears.
4 Touch and hold the target that point to
the centre and corners of the LCD screen.
The target indicates the order.
Modifying the general settings for navigation
functions
Engb
68
Chapter
12