Pioneer AVIC-F310BT - Manual (Page 69)

5 Touch anywhere on the screen.
The adjusted position data will be saved.
p Do not turn off the engine while saving the
adjusted position data.
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the
“Navigation Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Location].
4 Scroll to the position where you want
to set, then touch [OK].
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the
“Navigation Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Connection].
The
“Connection” screen appears.
1 Status
Indicates the connection status of the GPS
aerial, the reception sensitivity and from
how many satellites the signal is received.
Colour
Signal com-
munication Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
2 Hand Brake
When the handbrake is applied, [ On] is dis-
played. When the handbrake is released,
[
Off] is displayed.
3 Illumination
When the headlights or small lamps of a ve-
hicle are on, [
On] is displayed. When the
small lamps of a vehicle are off, [ Off] is dis-
played. (If the orange/white lead is not con-
nected, [
Off] appears.)
Checking the version
information
1 Display the
“Navigation Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Service Info].
The
“Service Information Screen” screen ap-
pears.
4 Check the version information.
Adjusting the screen
brightness
You can set the screen brightness for each of
the following situations.
! When the detachable device is attached to
the head unit and the vehicle lights are off.
! When the detachable device is attached to
the head unit and the vehicle lights are on.
! When the detachable device is not at-
tached to the head unit.
Modifying the general settings for navigation
functions
Engb
69
Chapter
12
Modifying
the
general
settings
for
navigation
functions