Checking sensor learning status and driving, Status, Checking sensor learning status and driving status – Pioneer AVIC-F850BT User Manual

Page 132: 26 customising preferences

Advertising
background image

Black plate (132,1)

Colour

Signal com-
munication

Used in posi-
tioning

Orange

Yes

Yes

Yellow

Yes

No

p When the GPS aerial is connected to

this navigation system,

“OK” is dis-

played.
When the GPS aerial is not connected to
this navigation system,

“NOK” is dis-

played.

p If reception is poor, please change the

installation position of the GPS aerial.

7 Installation

The installation position of the navigation
system is shown.
If installed correctly,

“OK” appears. Indi-

cates whether the installation position of
the navigation system is correct or not.
When the navigation system is installed at
an extreme angle exceeding the limitation
of the installing angle,

“NG” will be dis-

played. When the angle of the navigation
system has been changed,

“NG” will be dis-

played.

8 Bluetooth 1

The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.

9 Bluetooth 2

The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.

a Bluetooth 3

The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.

Checking sensor learning
status and driving status

p The navigation system can automatically

use its sensor memory based on the outer
dimensions of the tyres.

1

Display the

“Information” screen.

= For details, refer to Displaying the informa-

tion screen on page 131.

2

Touch [Navigation Info].

The

“Navigation Info” screen appears.

3

Touch [3D Calibration Status].

The

“3D Calibration Status” screen appears.

2

3

4

1

5

6

1 Learning

Indicates the current driving mode.

2 Distance

Indicates driving distance.

3 Acceleration or deceleration/Rotational

speed
Indicates the acceleration or deceleration
velocity of your vehicle. Also, the rotational
speed when your vehicle turns to the left or
right is shown.

4 Inclination

Indicates the incline of the street that you
are currently on.

5 Speed Pulse

Indicates the total number of speed pulses.

6 Degree of learning

Sensor learning situations for distance
(

Distance), right turn (Right Turn), left turn

(

Left Turn) and 3D detection (3D Detec-

tion) are indicated by the length of bars.

<CRB4228-A>132

Engb

132

Chapter

26

Customising preferences

Advertising
This manual is related to the following products: