Pioneer AVIC-F850BT - Manual (Page 30)

Black plate (30,1)
Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.
How to read the map screen
This example shows an example of a 2D map screen.
1
5
e d c
6
2
3
a
9
7
8
4
b
p Information with an asterisk (*) appears
only when the route is set.
p Depending on the conditions and settings,
some items may not be displayed.
1 Current time
2 Scale display touch panel key
Touching [+] or [
–] changes the map scale.
You can change the map scale between 10
metres and 2 000 kilometres (10 yards and
1 000 miles).
p The “_” mark shown below indicates the
scale distance (2D display only).
3 Map control
The “View” screen that can set the view mode
and the map orientation appears.
= For details of the operation, refer to
Switching the view mode on page 34.
= For details, refer to Switching the map or-
ientation on page 34.
4 Current position
Indicates the current location of your vehicle.
The apex of the triangular mark indicates your
orientation and the display moves automati-
cally as you drive.
p The apex of the triangular mark is the
actual current position of the vehicle.
5 Information bar
Each touch of this key changes the display in-
formation as follows.
! The information of where your vehicle is
travelling along
p When “Street Name” is selected on
“Current location info.” of “Navi
Settings
”, the street name or city
name is displayed. Also,
“Coordi-
nates ” is selected, latitude and longi-
tude are displayed.
= For details, refer to Setting the cur-
rent street name display on page
139.
<CRB4228-A>30
Engb
30
Chapter
03 How to use the map