Pioneer AVIC-F850BT - Manual (Page 148)

Black plate (148,1)
2 Touch .
The “Edit/Settings” screen appears.
3 Touch [Source Settings].
The
“Setting according to source” screen ap-
pears.
4 Touch the item you want to configure.
Setting video input 1 (AV1)
You can use outside video equipment such as
portable players connected to this product
with this setting.
p This setting applies to mini-jack input.
1 Display the “Setting according to
source
” screen.
= For details, refer to Displaying the screen for
AV system settings on page 147.
2 Touch [AV Input].
3 Touch [AV1 Input].
4 Touch [On].
The connected component is enabled.
p Use “AV1 Input” when connecting CD-
RM10 (sold separately) through the external
video component.
# If you touch [Off], the setting is turned off.
Setting video input 2 (AV2)
You can use outside video equipment such as
portable players connected to this product
with this setting.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
1 Display the “Setting according to
source ” screen.
= For details, refer to Displaying the screen for
AV system settings on page 147.
2 Touch [AV Input].
3 Touch [AV2 Input].
4 Touch [On].
The connected component is enabled.
# If you touch [Off], the setting is turned off.
Changing the screen size of SD/
USB video
Changes the screen size of video. If a video file
is played, you can select the display mode be-
tween normal and full screen.
1 Display the “Setting according to
source ” screen.
= For details, refer to Displaying the screen for
AV system settings on page 147.
2 Touch [SD/USB settings].
3 Touch [SD video output settings] or [Set
USB video output].
4 Touch [Full] or [Normal].
! Full (default):
A picture is enlarged in four directions with-
out keeping the aspect ratio and displays to
the full extent of a screen.
! Normal:
A picture is displayed fitting to the long side
of the screen while keeping the aspect
ratio.
<CRB4228-A>148
Engb
148
Chapter
26 Customising preferences