Pioneer AVIC-F850BT - Manual (Page 145)

Black plate (145,1)
2 Touch [Splash Screen Setting].
The
“Select Splash Screen” screen appears.
3 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
# If you touch [Show image], you can confirm a
selected image via full screen preview. Touch the
screen to return to the
“Select Splash Screen”.
4 Touch [OK].
The image is set as the splash screen, and the
map screen returns.
Changing to the splash screen
stored on the SD memory card
You can change the splash screen to other
images imported from the SD memory card.
p Splash screen images must be used within
the following formats.
! BMP or JPEG files
! Allowable data size is 6 MB or smaller
p The best image size is 800 pixels x 480 pix-
els.
p Proper compatibility with allowable files is
not guaranteed.
p Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
p The maximum number of images, includ-
ing those in the built-in memory, that can
be imported and displayed on the list is 10.
1 Create a folder named “Pictures” in the
top-most directory of the SD memory card.
2 Store the picture files in the
“Pictures”
folder.
3 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
4 Display the
“System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 143.
5 Touch [Splash Screen Setting].
The
“Select Splash Screen” screen appears.
6 Touch [Load from SD].
A message confirming whether to start load-
ing files appears.
! Yes:
Starts importing the files into the navigation
system.
! No:
Returns you to the previous screen.
The “Select Splash Screen” screen appears.
7 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8 Touch [OK].
The image is set as the splash screen, and the
map screen returns.
p Images imported from the SD memory card
are added to the list on
“Select Splash
Screen ”.
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
1 Press and hold the MODE button.
The picture adjustment screen appears.
2 Press and hold the MODE button while
the picture adjustment screen is still dis-
played.
The touch panel adjustment screen appears.
3 Touch two corner of the screen along
the allows, and then touch two centre of +
mark at the same time twice.
<CRB4228-A>145
Engb
145
Chapter
26
Customising
pr
eferences
Customising preferences