Setting the use of ferries 140, Setting the route calculation by, Learning route – Pioneer AVIC-F850BT User Manual
Page 140: Setting the route calculation allowing, For time restrictions, Setting the use of motorways 140, 26 customising preferences, Setting the use of ferries, Setting the route calculation by learning route, Setting the use of motorways
Black plate (140,1)
Setting the use of ferries
You can predefine the use of ferries when cal-
culating a route. This setting controls whether
ferry crossings should be taken into account.
1
Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 136.
2
Touch [Guide].
3
Touch [Ferry].
The setting screen appears.
4
Touch the item you want to set.
! Use (default):
Calculates a route that may include ferries
in a standard criteria.
! Avoid:
Calculates a route that avoids ferries.
Setting the route calculation by
learning route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
1
Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 136.
2
Touch [Guide].
3
Touch [Learning Route].
The setting screen appears.
4
Touch the item you want to set.
! On (default):
Calculates a route with the travel history
taken into account.
! Off:
Calculates a route without the travel history
taken into account.
Setting the route calculation
allowing for time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly.
= For details, refer to Setting the time difference
1
Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 136.
2
Touch [Guide].
3
Touch [Time restrictions].
The setting screen appears.
4
Touch the item you want to set.
! On (default):
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
! Off:
Calculates a route while ignoring traffic re-
strictions.
p If you want to set your route to avoid raised
draw bridges, select
“On”.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if
“On” is selected.
Setting the use of motorways
You can predefine the use of motorways when
calculating a route.
1
Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 136.
2
Touch [Guide].
<CRB4228-A>140
Engb
140
Chapter
26
Customising preferences