Pioneer X-HM50-K - Manual (Page 13)

11/2/23 X-HM50_En.fm
13
Advanced CD or MP3/WMA disc playback
By using the Direct Search buttons, the desired tracks
on the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected disc.
• The Direct Search buttons allow you to select up to
number 9.
• When selecting number 10 or higher, use the “ >10 ”
button.
Notes
• A track number higher than the number of tracks on
the disc cannot be selected.
• During random play, direct search is not possible.
To stop playback:
Press the (
CD/USB ) button.
Repeat play can play one track, all tracks or a
programmed sequence continuously.
To repeat one track:
Press the
PLAY MODE button repeatedly until “ Repeat
One ” appears. Press the / ( CD/USB / ) button.
To repeat all tracks:
Press the
PLAY MODE button repeatedly until “ Repeat
All ” appears. Press the / ( CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on
this page and then press the
PLAY MODE button
repeatedly until “ Repeat All ” appears.
To cancel repeat play:
Press the
PLAY MODE button repeatedly until “ Normal ”
appears and “ ” disappears.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Whilst in the stop mode, press and hold down
PLAY
MODE button on the remote control until “ Random ”
appears. Press the / ( CD/USB / ) button.
To cancel random play:
Press the (
CD/USB ) button.
Notes
• If you press the button during random play, you
can move to the track selected next by the random
operation. On the other hand, the button does not
allow you to move to the previous track. The
beginning of the track being played will be located.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
CAUTION
After performing repeat play, be sure to press the
(
CD/USB ) button. Otherwise, the disc will play
continuously.
You can choose up to 32 selections for playback in the
order you like.
n Direct track search
A. For example, to choose 13
1 Press the “>10” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “>10” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
n Repeat play
Selected track number
n Random play
n Programmed play (CD)
1 Whilst in the stop mode, press the MEMORY button
on the remote control to enter the programming
save mode.
2 Press the
or button on the remote control
to select the desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks
can be programmed.
If you want to check the programmed tracks, press
the
MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the
CLEAR button.
5 Press the / (CD/USB / ) button to start
playback.
Selected track number