Pioneer X-HM50-K - Manual (Page 22)

11/2/23 X-HM50_En.fm
22
Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (
CD ,
TUNER , USB , iPod , AUDIO IN , LINE IN ) at a preset time.
This unit has 2 types of timer: ONCE TIMER and
DAILY TIMER.
Once timer:
Once timer play works for one time only at a preset
time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
Notes
• When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack,
select “
USB ” or “ AUDIO IN ” or “ LINE IN ” in step 5.
• This unit will turn on or enter the power stand-by
mode automatically. However, the connected unit
will not turn on or off. To stop the timer playback,
follow step “Cancelling the timer setting” of next
page.
1 Set the daily timer (pages 22 - 23).
2 Set the once timer (pages 22 - 23).
n Timer playback
Before setting timer:
• Check that the clock is set to the correct time (refer
to page 9). If it is not set, you cannot use the timer
function.
• For timer playback: Plug in USB or load discs or
dock iPod to be played.
1 Press the STANDBY/ON button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 10 seconds, press the
or button to
select “Once” or “Daily”, and press the ENTER button.
4 Within 10 seconds, press the or button to
select “Timer Set”, and press the ENTER button.
Once timer Daily timer
Start Stop
1 minute or more
Start Stop
5 To select the timer playback source (CD, TUNER,
USB, iPod, AUDIO IN, LINE IN), press the or
button. Press the ENTER button.
When you select the tuner, select a station by
pressing the
or button, and then press the
ENTER button. If a station has not been programmed,
“ No Preset ” will be displayed and timer setting will be
cancelled.
6 To adjust the day, press the
or button and
then press the ENTER button.
7 To adjust the hour, press the or button and
then press the ENTER button.
8 To adjust the minutes, press the or button
and then press the ENTER button.
9 Set the time to finish as in steps 7 and 8 above.
10 Adjust the volume using the
or button, and
then press the ENTER button.
• Do not turn the volume up too high.
11 Press the STANDBY/ON button to enter the power
stand-by mode.
The “
TIMER ” indicator lights up and the unit is ready
for timer playback.
12 When the preset time is reached, playback will
start.
The volume will increase gradually until it reaches
the preset volume. The timer indicator will blink
during timer playback.
13 When the timer end time is reached, the system
will enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
STANDBY/ON
INPUT
PHONES AUDIO IN
TIMER
VOLUME
USB
X-HM50