Pioneer X-HM50-K - Manual (Page 16)

11/2/23 X-HM50_En.fm
16
Listening to USB mass storage device/MP3 player (continued)
Notes
• PIONEER will not be held liable for the loss of data
whilst the USB memory device is connected to the
audio system.
• Files compressed in MP3 and/or WMA format can
be played back when connected to the USB
terminal.
• This USB memory’s format supports FAT 16 or FAT
32.
• PIONEER cannot guarantee that all USB memory
devices will work on this audio system.
• USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of
the USB cable will affect the performance of this
audio system.
• This USB memory cannot be operated via USB hub.
• The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a
USB memory device.
• External HDD-storage cannot be played back via
USB terminal.
• If the data inside the USB memory is large, it may
take longer time for the data to be read.
• This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “
Not
Support ” is indicated and the file will be
automatically skipped. This will take a few seconds.
If abnormal indications appear on the display due to
the unspecified file, turn off the unit and then turn it
on again.
• This product relates to USB mass storage devices
and MP3 players. It may however face some
irregularities due to various unforeseen reasons
from some devices. Should this happen, turn off the
unit and then turn it on again.
• The USB port is only intended for direct connection
to a USB memory device without any cable.
• During CD function, MP3 player will not be
charging.
• “ Not support ” will be displayed if you connect an
iPod to USB terminal when the USB function is
selected.
Advanced USB playback
The following functions are the same as CD
operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Notes
• If USB memory device is not connected, “ No USB ”
will be shown on the display.
• This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32 kHz, 44.1 kHz, 48
kHz)
• Playback order for MP3 files may differ depending
on the writing software used during file download.
• Bitrate which is supported by MP3 is 32 kbps to 320
kbps, WMA is 64 kbps to 160 kbps.
• For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
• Playlists are not supported on this unit.
• This unit can display Folder Name or File Name up to
32 characters.
• Maximum total number of MP3/WMA files is 1024.
Maximum total number of folders is 255 inclusive of
root directory.
• The display playback time may not be displayed
correctly when playing back a variable bitrate file.
• The ID3TAG information supported are TITLE,
ARTIST and ALBUM only. Title name, artist name
and album name can be displayed by pressing the
DISPLAY button during file playback or pause mode.
• WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
n To play back USB/MP3 player with
folder mode on
1 Press the USB button on the remote control or
INPUT button repeatedly on main unit to select USB
function.
Connect the USB memory device that has MP3/
WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Press the FOLDER button, and press the PRESET (
or ) button to select desired playback folder.
To start playback with folder mode on, go to step 4.
To change the playback folder, press the
PRESET ( or
) button to select another folder.
3 Select desired file to be played back by pressing the
or button.
4 Press the / (CD/USB / ) button.
Playback will start and the file name will be
displayed.
• Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
• Display content can be changed by pressing the
DISPLAY button.
n To remove USB memory device
1 Press the (CD/USB ) button to stop playback.
2 Disconnect USB memory device from the USB
terminal.