Pioneer X-HM50-K - Manual (Page 14)

11/2/23 X-HM50_En.fm
14
Advanced CD or MP3/WMA disc
playback (continued)
To cancel the programmed play mode:
Press the (
CD/USB ) button. The display will show
“ Memory Clear ” and all the programmed contents will
be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “
MEM ”
indicator will be displayed. Press the MEMORY button
repeatedly to go to the last programme memory. Then
follow steps 2 - 3 to add tracks. The new tracks will be
stored after the last track of the previous programme.
Notes
• When a disc is ejected, the programme is
automatically cancelled.
• If you press the STANDBY/ON button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
• During the programme operation, random play is
not possible.
MP3/WMA folder mode (only for
MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music
files. Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
• Your downloaded song/files are for personal use
only. Any other usage of the song without owner’s
permission, is against the law.
If MP3/WMA files are recorded in several folders, a
folder number will be set to each folder automatically.
These folders can be selected by the
FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the
next folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
• The folder and file order information which is
recorded on the disc depends on the writing
software. There maybe possibilities that this unit will
playback the files not according to our expected
playback order.
• For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from
those played back when folder mode is turned off.
n Programmed play (MP3/WMA)
1 Whilst in the stop mode, press the MEMORY
button to enter the programming save mode.
2 Press the PRESET ( or ) button on the remote
control to select the desired folder.
Then press the or button on the remote
control to select the desired tracks.
3 Press the MEMORY button to save the folder and
track number.
4 Repeat steps 2 - 3 for other folder/tracks. Up to 32
tracks can be programmed.
5 Press the / (CD/USB / ) button to start playback.
n About folder playback order
1 ROOT folder is set as folder 1.
2 As for folders inside ROOT folder (Folder A and
Folder B), the folder which is recorded earlier on the
disc will be set as folder 2 and folder 3.
3 As for folder inside Folder A (Folder C and Folder D),
the folder which is recorded earlier on the disc will
be set as folder 4 and folder 5.
4 Folder E that is inside Folder D will be set as folder 6.
ROOT
(FOLDER 1) FOLDER A
(FOLDER 2)
FOLDER B
(FOLDER 3)
FILE 9
FILE 10
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6) FOLDER C
(FOLDER 4)
FOLDER D
(FOLDER 5)
FILE 1
FILE 2