Pioneer X-HM50-K - Manual (Page 21)

11/2/23 X-HM50_En.fm
21
Listening to the DAB (continued)
Press the DAB/RDS DISPLAY button repeatedly to
display more information about the selected DAB
station.
DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS text
data, the text will scroll across the display.
Program Type
Displays the type of program.
Multiplex Name
Displays the name of the current multiplex.
Channel and Frequency
Displays the channel and frequency of the current
multiplex.
Bit Rate and Audio Mode
Displays the station’s bit rate and audio mode (stereo or
mono).
Signal Quality
Displays the signal quality.
0 – 59 : Poor reception
60 – 79 : Good reception
80 – 100 : Excellent reception
Sensitivity
Display the sensitivity of reception. Keep 100 % for good
reception.
Use the following functions and settings to set up DAB
digital radio.
Auto Scan?
This setting determines which DAB frequency range of
Band III is scanned by the Auto Scan function (see page
20).
UK (default) : Band III (11B.12D)
All Band 3 : Band III (5A.13F)
Tuning Aid?
With the Tuning Aid, you can adjust the position and
direction of the DAB/FM aerial (see page 7 for adjusting
the aerial) while monitoring the signal strength on the
display. If the letter “
B ” appears on the display, it means
the signal strength is Bad. If the letter “ G ” appears, it
means the signal strength is Good.
To display the letter “
G ”, adjust the antenna. Press the
or button to select the other multiplexes (Band
III: 5A.13F).
St. Order?
With this setting, you can change the order of stations
in the station list.
Press the
or button to select the following
options, and then press the ENTER button.
Alphabet (default) : Sort stations alphabetically.
Favorite : Sort stations by favorites. The stations you
select the most will appear at the top of the list.
Active : Sort by active stations. Receivable stations
appear at the top of the list. Stations that cannot be
received properly appear at the bottom of the list.
Multiplex : Sort stations by multiplex.
Trim List : Delete all of the stations that cannot be
received properly from the list.
DRC Setting?
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels.ideal for listening to the radio late at
night when you don’t want to disturb anyone.
Press the
or button to select the following
options, and then press the ENTER button.
DRC 0 (default) : DRC off.
DRC 1 : Large reduction in dynamic range.
DRC 1/2 : Small reduction in dynamic range.
n Displaying DAB radio information
n DAB setup
1 Press the DAB MENU button repeatedly until the
item to be set appears.
2 Press the ENTER button.
The items are explained below.
Scroll
n Presetting DAB stations manually
1 Tune into the station that you want to store as a
preset (see page 20).
2 Press the MEMORY button.
The preset number flashes.
3 Press the PRESET ( or ) button to select a preset.
4 To store the station, press the MEMORY button.
5 Repeat steps 1 to 4 to preset more DAB stations.
Multiplex number
G (Good) or B (Bad)