Pioneer AVIC-HD3 RU - Manual (Page 104)

102
Chapte
r
9
Using
the AV Source
(Built
-i
n DVD Drive and
Radio)
AV
❒ Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
❒ When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station’s AF list. (This is
only available when using presets on the
FM1 or FM2 bands.) No preset number
appears on the display if the RDS data for
the station received differs from that for
the originally stored station.
❒ Sound may be temporarily interrupted by
another programme during an AF fre-
quency search.
❒ AF can be turned on or off independently
for each FM band.
Using PI Seek
If the navigation system fails to find a suitable
alternative frequency, or if you are listening to a
broadcast and the reception becomes weak, the
navigation system will automatically search for a
different station with the same programming.
During the search, “PI Seek” is displayed and the
output for audio source is muted. The muting is
discontinued after completion of the PI Seek,
whether or not a different station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the navigation
system can be set to perform PI Seek during pre-
set recall.
❒ The default setting for Auto PI Seek is off.
➲ “Switching Auto PI seek” ➞ Page 139
Limiting stations to regional
programming
When AF is used to automatically retune frequen-
cies, the regional function limits the selection to
stations broadcasting regional programmes.
1
Touch (or ).
Touching the key switches the status between
on and off.
❒ Regional programming and regional net-
works are organised differently depending
on the country (i.e., they may change
according to the time, country or broad-
cast area).
❒ The preset number may disappear on the
display if the tuner tunes in a regional sta-
tion which differs from the originally set
station.
❒ The regional function can be turned on or
off independently for each FM band.