Map 48, Setting the map colour change between day and, Night 48 – Pioneer AVIC-HD3 RU User Manual
Page 50: Setting the map colour change between
48
Chapter
4
M
odifying Ma
p
Co
n
figurations
NAV
I
Viewing the Map Colour Legend
You can browse the type of the roads and areas
displayed on the map.
1
Touch [Map] in the navigation menu, then
touch [Map Legend].
2
Touch the type which you want to see.
3
Touch or to switch to the next page or
previous page.
On this screen, you can operate the following
items.
[Day]:
You can check the colour of the Day screen.
[Night]:
You can check the colour of the Night screen.
❒ To return the previous screen, touch
[Back].
Changing the View Mode for the
Navigation Map
You can change the map display mode.
❒ You cannot perform this operation in “Scroll
mode”.
1
Touch [Map] in the navigation menu, then
touch [View Mode].
2
Touch the type that you want to set.
➲ “How to Use the Map” ➞ Page 37
Setting the Map Colour Change
between Day and Night
To improve the visibility of the map during the
evening, you can set the timing for changing the
combination of the map colour.
1
Touch [Map] in the navigation menu.
2
Touch [Day/Night Display] to change the
setting.
Each time you touch the key changes that set-
ting.
Automatic*:
You can change the colours of a map between
daytime and nighttime according to whether
the vehicle lights are On or Off.
Day:
The map is always displayed with daytime col-
ours.
❒ To use this function with [Automatic], the
Orange/white lead of the navigation sys-
tem must be connected correctly.
❒ You can also change the brightness of the
screen between daytime and nighttime
with [Dimmer].