Pioneer AVIC-HD3 RU - Manual (Page 41)

39
Chapter
3
How t
o R
ead
the
M
ap
Disp
lay
NA
VI
❒ Rear View can be displayed at all times (e.g.
when monitoring an attached trailer) as a split
screen where map information is partially dis-
played. Please beware that in this setting,
camera image is not resized to fit to screen,
and that a portion of camera image may not
be viewable.
Enlarged map of the intersection
This screen is displayed only when [Close Up
View] in the [Map] menu is [2D] or [3D].
Display items
❒ Information with the mark (*) appears only
when the route is set.
❒ Depending on the conditions and settings,
some items may not be displayed.
Current location
The current location of your vehicle. The tip of the
triangular mark indicates your heading and the
display moves automatically as you drive.
❒ The head of the triangular mark is the current
vehicle position.
Destination*
The checker-flag indicates your destination.
Guidance point*
The next guidance point (next turning point, etc.)
is shown by a yellow flag.
Up to the next three guidance points.
Waypoint*
The checker-flag and number (1 to 5) indicates
your waypoint.
(1) Name of the street to be used (or next
guidance point)*
(2) Distance to the guidance point*
Touching
allows you to hear the infor-
mation again.
(3) Distance to the destination (or distance to
waypoint)*
The distance on this button shows the distance to
the destination or to each waypoint. If waypoints
are set, the distance to the destination and the
next waypoint change with each touch.
❒ When the vehicle position is on the route, the
distance to the destination (or waypoint)
appears. When the vehicle position is not on
the route, the linear distance to the destina-
tion (or waypoint) appears.
(4) Street name (or city name) that your vehi-
cle is travelling along
(5) Compass
The red arrow indicates north. If the scale is less
than 50 km (25 mi), touching the map changes
the direction that it is displayed in (north up/
heading up). When the scale of the map is
greater than 50 km (25 mi), it is fixed to “North
up”.
Heading up:
The map display always shows the vehicle’s
direction as proceeding toward the top of the
screen.
North up:
The map display always has north at the top of
the screen.
(6) Zoom in/Zoom out
Touch to change the map’s scale.
➲ “Changing the scale of the map” ➞ Page 41
(7) Map scale
(12)
(13)
Enlarged map of the intersection (2D)
(19)
Enlarged map of the intersection (3D)