Pioneer AVIC-HD3 RU - Manual (Page 47)

45
Chapter
4
Modify
ing Map Conf
igurat
io
ns
NA
VI
Chapter 4
Modifying Map Configurations
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the handbrake
before setting your route (see page 18
Interlock for details).
Entering the Map Menu
1
Press the MENU button to display the
navigation menu.
2
Touch [Map] to display the Map menu.
3
Change the setting.
➲ Adjusting each item ➞ Page 45 to 49
❒ This section describes the details of the
setting for each item. Settings marked with
an asterisk (*) show that these are default
or factory settings.
Setting the Item on the Map
Screen
You can select whether to display or hide the icon
on the map or how to display the map.
1
Touch [Map] in the navigation menu, then
touch [Displayed Info].
The Displayed Info screen appears.
On this screen, you can operate the following
items.
2
To finish the setting, touch [OK].
Close Up View
You can select the method to display the close
up view of the intersection.
2D*:
Displays the close up view with the 2D map.
3D:
Displays the close up view with [Driver’s
View].
Off:
Does not display the close up view.
Tracking Display
You can trace locations that you have already
passed with white dots on the route.
On (Always):
Display tracking for all journeys.
On (This journey):
Display tracking dots but erase them when
the navigation system is turned off (when
turning off the engine of your vehicle).
Off*:
Does not display tracking dots.
Show Mute Button
Selects whether to display or hide the voice
guidance mute key on the map.
View*:
Displays the voice guidance mute key on the
map.
Hide:
Hides the voice guidance mute key on the
map.