Pioneer SC-LX90 - Manual (Page 68)

Other connections 07
68
En
Using this amplifier with a Pioneer
plasma television
If you have a Pioneer plasma television, you can use an
SR+ cable 1 to connect it to this unit and take advantage
of various convenient features, such as automatic video
input switching of the plasma television when the input
is changed.
2
Important
• You can’t use the SR+ features when HDMI Control
is set to ON. Make sure to set HDMI Control to OFF
when you use the SR+ features (page 92).
• If you connect to a Pioneer plasma television using
an SR+ cable, you will need to point the remote
control at the plasma television remote sensor to
control the amplifier. In this case, you won’t be able
to control the amplifier using the remote control if
you switch the plasma television off.
• Before you can use the extra SR+ features, you need
to make a few settings in the amplifier. See The Input
Setup menu on page 94 and SR+ Setup for Pioneer
plasma televisions on page 97 for detailed
instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this amplifier with the CONTROL
OUT jack of your plasma television.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma television, and just connect the audio (analog
and/or digital) to this amplifier.
Note
1 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).
2 This amplifier is compatible with all SR+ equipped Pioneer plasma televisions from 2003 onward.
L VIDEO O
ZONE3 OUT
ZONE2 OUT
MONITOR OUT OUT
IN
1
IN
2
IN
3
IN
4
1
OUT 2
OUT
3
OUT
4
IR
CONTROL
COMPONENT
VIDEO
ASSIGN-
ABLE
ASSIGN-
ABLE
VIDEO
IN OUT
1 2 3 4
12 V TRIGGER
(DC OUT 12V TOTAL 250 mA MAX)
RS-
232C
VIDEO/
GAME 1
IN
SAT IN
TV IN
BD IN
DVD/LD IN
IN IN
IN
(DVD/LD)
IN (DVD/LD)
1
1 5
IN
(VIDEO/
GAME 1)
3
IN (BD) 2
IN
(DVR/VCR 1) 4
IN
(DVR/VCR 2) 5
IN
ZONE2 OUT
DVR/ VCR 2
DVR/ VCR 1
REC SEL OUT REC SEL OUT
IN
REC SEL OUT REC SEL OUT
S-VIDEO Y P B P R
CONTROL
IN
OUT
CONTROL
Pioneer plasma
television
SC-LX90
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
R1 R2 R3 R4 R5 ACTIVE MONITOR L5 L4 L3 L2 L1
VIDEO
INPUT 1
VIDEO
INPUT 2
SAT
AUDIO IN
DVD/LD
AUDIO IN
Pioneer plasma
television
This amplifier
DVD player Satellite receiver, etc.
SC_LX90_WY.book Page 68 Wednesday, February 6, 2008 11:49 AM