Other settings 10, Zone audio setup, Sr+ setup for pioneer plasma televisions – Pioneer SC-LX90 User Manual
Page 97
Other Settings
10
97
En
2
Select whether to set ‘ZONE 2 VIDEO CONV.’ to ON
or OFF.
•
ON – The composite video or S-Video input signals
are converted with respect to COMPONENT VIDEO
ZONE2 OUT or VIDEO ZONE2 OUT.
1
This way, video
signals can be output even if the input device and the
ZONE2 TV monitor are connected with different types
of cables.
•
OFF – The ZONE2 video output is not converted. In
this case, connect the input device and ZONE2 TV
monitor with the same type of cable (composite or
component).
3
When you’re finished, press RETURN.
You will return to the Other Setup menu.
ZONE Audio Setup
If you’ve made MULTI-ZONE connections (see
MULTI-
ZONE listening on page 64), you may need to specify your
volume setting.
1
Select ‘ZONE Audio Setup’ from the Other Setup
menu.
2
Select the ‘ZONE 3 / RECSEL Setting’ you want.
You can select the
ZONE 3 or RECSEL setting.
•
ZONE 3 – Sound is output from AUDIO ZONE3 OUT
jack.
•
RECSEL – Sound is output from the CD-R/TAPE/MD
OUT, DVR/VCR 1 OUT or DVR/VCR 2 OUT jack. For
details, see
Playing a different source when recording
on page 102.
3
Select the volume level setting of ZONE 2 and
ZONE 3.
2
•
Variable – Use this setting if you’ve connected a
power amplifier in the sub room (this amplifier is
simply being used as a pre-amp) and you will be
using this amplifier’s controls to adjust the volume.
•
Fixed – Use this setting if you’ve connected a fully
integrated amplifier (such as another Pioneer VSX
amplifier) in the sub room and want to use that
amplifier’s volume controls.
With the
Fixed setting, the source is sent from this
amplifier at maximum volume, so make sure the volume
is quite low in the sub zone at first, and then experiment
to find the correct level.
4
When you’re finished, press RETURN.
You will return to the Other Setup menu.
SR+ Setup for Pioneer plasma televisions
Make the following settings if you have connected a
Pioneer plasma television to this amplifier using an SR+
cable. Note that the number of function settings available
will depend on the plasma television you’ve connected.
See also
Using this amplifier with a Pioneer plasma
television on page 68 and Using the SR+ mode with a
Pioneer plasma television on page 69.
1
Select ‘SR+ Setup’ from the Other Setup menu.
2
Select the ‘PDP Volume Control’ setting you want.
•
OFF – The amplifier does not control the volume of
the plasma television.
•
ON – When the amplifier is switched to one of the
inputs that use the plasma television (
DVD/LD, for
example), the volume on the plasma television is
muted so only sound from the amplifier is heard.
3
Assign any input source connected to the plasma
television to the corresponding input number.
This matches the amplifier’s input source with a
numbered video input on the plasma television. For
example, assign
DVD/LD to input-2 if you have
connected the your DVD video output to video input 2 on
the plasma television.
• The
Monitor Out Connect should be set to the input
that you’ve used to connect this amplifier to your
plasma television.
4
When you’re finished, press RETURN.
You will return to the Other Setup menu.
Note
1 The component video input signal is only output from COMPONENT VIDEO ZONE2 OUT.
2 If you selected
7.2ch+ZONE 2 in the Speaker output setting on page 43, you won’t be able to change the volume level.
: R e t u r n
a . M u l t i C h I n S e t u p
b . Z O N E V i d e o S e t u p
c . Z O N E Au d i o S e t u p
d . S R + S e t u p
e . H D M I C o n t ro l S e t u p
f. i . L I N K C h e ck
g . D i s p l ay I m ag e
9 . O t h e r S e t u p
DV D / L D
- 5 5 . 0 dB
: F i n s h
9 c . Z O N E Au d i o S e t u p
DV D / L D
- 5 5 . 0 dB
Z O N E 3 / R E C S E L S e t t i n g
Z O N E
3
Z O N E 2 Vo l u m e L e v e l
[
Va r i a bl e
]
Z O N E 3 Vo l u m e L e v e l
[
Va r i a bl e
]
: R e t u r n
a . M u l t i C h I n S e t u p
b . Z O N E V i d e o S e t u p
c . Z O N E Au d i o S e t u p
d . S R + S e t u p
e . H D M I C o n t ro l S e t u p
f. i . L I N K C h e ck
g . D i s p l ay I m ag e
9 . O t h e r S e t u p
DV D / L D
- 5 5 . 0 dB
: F i n i s h
P D P Vo l u m e C o n t ro l
O F F
M o n i t o r O u t C o n n e c t
[
O F F
]
9 d . S R + S e t u p
DV D / L D
- 5 5 . 0 dB
P D P Vo l u m e C o n t ro l
[
O F F
]
M o n i t o r O u t C o n n e c t
O F F
9 d . S R + S e t u p
DV D / L D
- 5 5 . 0 dB
: F i n i s h
SC_LX90_WY.book Page 97 Wednesday, February 6, 2008 11:49 AM