Pioneer VSX-818V-K - Manual (Page 24)

Controls and displays 04
24
En
10 MCACC PORTABLE jack
Use to connect a microphone when
performing Auto MCACC setup, or connect an
auxiliary component using a stereo mini-jack
cable (page 18).
11 PHONES jack
Use to connect headphones (when connected,
there is no sound output from the speakers
(except speaker system B connections)).
12 ST +/–
Use to select preset radio stations (page 47).
13 TUNE +/–
Used to find radio frequencies (page 46).
14 SOUND RETRIEVER
Press to restore CD quality sound to
compressed audio sources (page 32).
15 VSB MODE
Press to switch on/off Virtual Surround Back
(VSB) mode (page 33).
16 SPEAKERS
Use to change the speaker system (page 22)
and the impedance setting (page 70).
17 SIGNAL SELECT
Selects an input signal (page 36).
18 PHASE CONTROL
Press to switch on/off Phase Control (page 10).
19 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ
setting (page 33).
20 Listening mode buttons
AUTO SURR/STREAM DIRECT
Switches between Auto surround mode
(
Auto playback on page 30) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 32).
STEREO/A.L.C.
Switches between stereo playback, Auto
level control stereo mode (page 31) and
Front Stage Surround Advance modes
(page 32).
STANDARD
Press for Standard decoding and to switch
between the various
2 Pro Logic II options
(page 30).
ADVANCED SURROUND
Switches between the various surround
modes
(page 31).
Display
1 SIGNAL indicators
Lights to indicate the type of input signal:
AUTO
Lights when AUTO signal select is on.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital encoded signal
is detected.
6
6
0
L
C
R
Ls
Rs
[ ]
[ ]
[ ]
[ ]
[ ]
4 0 125 25 0 4 K1 3 K
SP AB
1 2 3 4 5 6 7 8 9 10
13 16 15 17 18 14 19 20
EON
RD S
11 12
VSX_918_818_MY.book 24 ページ ２００７年１２月２７日 木曜日 午後４時２７分