Pioneer AVIC-F930BT - Manual (Page 116)

You can display the video image output by the
equipment connected to the navigation sys-
tem. For details of the connection method,
refer to Installation Manual.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the handbrake.
Reading the screen
2
1
1 Current time
2 Source icon
Shows which source has been selected.
Using AV1
You can display the video image output by the
equipment connected to video input 1.
1 Touch [AV1 Input] on the
“AV System
Settings
” menu.
= For details, refer to Setting video input 1
( AV1) on page 139.
2 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 61.
3 Tap [AV1] on the left edge of the
screen.
The image is displayed on the screen.
4 Touch the screen to display the touch
panel keys.
Using AV2
You can display the video image output by the
equipment connected to video input 2.
1 Touch [AV2 Input] on the
“AV System
Settings
” menu.
= For details, refer to Setting video input 2
( AV2) on page 139.
2 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 61.
3 Tap [AV2] on the left edge of the
screen.
The image is displayed on the screen.
4 Touch the screen to display the touch
panel keys.
Using the touch panel keys
1 2
1 Recalls equaliser curves
= For details, refer to Using the equaliser
on page 143.
2 Hides the touch panel keys
Touching [ Hide] hides the touch panel keys.
p If you want to display the touch panel
keys again, touch anywhere on the LCD
screen.
Engb
116
Chapter
24 Using AV input