Pioneer AVIC-F930BT - Manual (Page 157)

Symptom Cause Action (Reference)
No video output from connected
equipment.
No video output from connected
iPod.
“AV1 Input” or “AV2 Input” setting
is incorrect.
Correct the settings. (Page 116)
The connection of the USB interface
cable for iPod is incorrect. Connect both the USB plug and the RCA
cable side. (If only one of these connection
has been made, the iPod will not work prop-
erly.) (Page 15)
The audio or video skips. The navigation system is not firmly
secured. Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video. There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback. For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
The icon 9 is displayed, and op-
eration is not possible.
The operation is not compatible
with the video configuration. This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the navigation system cannot be
operated. The reading of data is impossible
during disc playback. Stop playback once, and start playback again.
The picture is stretched, with in-
correct aspect ratio. The aspect setting is incorrect for
the display. Select the appropriate setting for that image.
(Page 139, Page 94)
A parental lock message is dis-
played and DVD playback is not
possible. Parental lock is on. Turn parental lock off or change the level.
(Page 94)
Parental lock for DVD playback
cannot be cancelled. The code number is incorrect. Input the correct code number. (Page 94)
Playback is not with the audio
language and subtitle language
settings selected in
“DVD/
DivX® Setup ”.
The DVD playing does not feature
dialogue or subtitles in the lan-
guage selected in
“DVD/DivX®
Setup ”.
Switching to a selected language is not possi-
ble if the language selected in
“DVD/DivX®
Setup
” is not recorded on the disc. (Page 93)
The picture is extremely unclear/
distorted and dark during play-
back. The disc features a signal to prohibit
copying. (Some discs may have
this.) Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
iPod cannot be operated. The iPod is frozen.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
off (ACC OFF). Then start the engine again,
and turn the power to the navigation system
back on.
! Update the iPod software version.
Engb
157
Appendix
Appendix
Appendix