Pioneer AVIC-F930BT - Manual (Page 132)

5 Touch [Voice Language].
The
“Voice Language Selection” screen ap-
pears.
6 Touch the desired language.
After the language is selected, the previous
screen returns.
7 Touch [OK] on the
“Regional Settings”
screen.
A message confirming whether to restart the
navigation system appears.
8 Touch [OK].
The navigation system restarts.
# If you press the MODE or HOME button, the
setting procedure is cancelled.
Installing additional files for voice
guidance (TTS files)
TTS file is used to read out the street name in
the route guidance by navigation system. If
the latest TTS file is available, you can replace
the current TTS file with the latest one.
1 Use your PC to copy the folder named
“Voice” onto the top-most directory of the
SD memory card.
The
“Voice” folder is stored on the supplied
CD-ROM. Use your PC to copy it.
2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
3 Touch [Voice Language].
The
“Voice Language Selection” screen ap-
pears.
4 Touch [Setup Voice].
The
“Voice Language Setup” screen appears.
5 Touch [Change Voice Language].
The
“Voice Language Selection (SD)” screen
appears.
6 Touch the desired language.
After a while, loading completes and the
“Re-
gional Settings
” screen returns.
7 Touch [OK] on the
“Regional Settings”
screen.
A message confirming whether to restart the
navigation system appears.
8 Touch [OK].
The navigation system restarts.
# If you press the MODE or HOME button, the
setting procedure is cancelled.
Setting the time difference
Adjusts the system
’s clock. Set the time differ-
ence ( +,
–) from the time originally set in your
navigation system.
1 Display the
“System Settings” screen.
= For details, refer to Displaying the screen for
system settings on the previous page.
2 Touch [Regional Settings].
The
“Regional Settings” screen appears.
3 Touch [Time].
The
“Time Settings” screen appears.
Engb
132
Chapter
26 Customising preferences