Pioneer AVIC-F930BT - Manual (Page 24)

Switching the map orientation
You can switch how the map shows your vehi-
cle
’s direction between “Heading up” and
“North up”.
! Heading up:
The map display always shows the vehicle
’s
direction as proceeding toward the top of
the screen.
! North up:
The map display always has north at the
top of the screen.
p The map orientation is fixed at “North up”
when the map scale is 50 kilometres (25
miles) or more.
p The map orientation is fixed at “Heading
up
” when the 3D map screen is displayed.
1 Display the map screen.
2 Touch on the map screen.
or appears.
3 Touch or to switch the vehicle ’s
direction.
Each time you touch the key changes the set-
ting.
p If you do not operate the function for a few
seconds, the touch panel keys for map dis-
play control disappear.
Scrolling the map to the
position you want to see
1 Display the map screen.
2 Touch and drag the map in the desired
direction to scroll.
2
1
1 Cursor
2 Distance from the current position
Positioning the cursor to the desired location
results displaying in a brief informational over-
view about the location at the bottom of
screen, with the street name and other infor-
mation for this location. (The information
shown varies depending on the position.)
p The scrolling increment depends on your
dragging length.
# If you touch
, the map returns to the cur-
rent position.
p Pressing MODE button returns the map to
the current position.
Viewing information about a
specified location
An icon appears at registered places (home lo-
cation, specific places,
Favourites entries)
and places where there is a POI icon. Place
the scroll cursor over the icon to view detailed
information.
1 Scroll the map and move the scroll cur-
sor to the icon you want to view.
2 Touch .
The
“Information List” screen appears.
Engb
24
Chapter
04 How to use the map