Pioneer AVIC-F930BT - Manual (Page 148)

5 Touch [+] or [ –] next to “Level” to adjust
the output level.
“+6” to “–24” is displayed as the level is in-
creased or decreased.
6 Touch [c] or [d] next to
“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch [c] or [d], cut-off fre-
quencies are selected in the following order:
50Hz
— 63Hz — 80Hz — 100Hz — 125Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Using the high pass filter
When you cut lower sounds from the subwoo-
fer output frequency, activate
HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 142.
2 Touch [HPF].
Each time you touch [ HPF] selects cut-off fre-
quencies in the following order:
Off
— 50Hz — 63Hz — 80Hz — 100Hz —
125Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 142.
3 Touch [SLA].
4 Touch [+] or [
–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, and DivX
! SD and USB
! AV1 and AV2
! EXT1 and EXT2
p The different source volume level can be set
between iPod and USB.
Enhancing bass (Bass Booster)
You can enhance bass sounds that are often
muted by driving noise.
1 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 142.
2 Touch [Bass Booster].
3 Touch [+] or [
–] to adjust the range from
0 to 6.
Replicating the settings
You can import settings you have made on the
utility programme NavGate FEEDS which is
available separately to the navigation system.
1 Use NavGate FEEDS to replicate the set-
tings and store them on an SD memory
card.
Engb
148
Chapter
26 Customising preferences