Setting the volume for guidance and, Phone, Changing the preinstalled splash – Pioneer AVIC-F930BT User Manual

Page 134: Screen, Changing to the splash screen stored, In the sd memory card, Setting the volume for, Setting the volume, 26 customising preferences, Setting the volume for guidance and phone

Advertising
background image

Setting the Volume for
Guidance and Phone

The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.

1

Display the

“System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 131.

2

Touch [Volume].

The

“Volume Settings” screen appears.

3

Touch [+] or [

–] to set their volume.

On this screen, you can operate the following
items.

! Guidance

This setting controls the guidance volume
of navigation.
p When set to , guidance is output.

When set to

, no guidance is output.

! Phone Ringtone

This setting controls the incoming ring tone
volume.

! Phone Voice

This setting controls the incoming voice vo-
lume.

p “Phone Ringtone” and “Phone Voice” ad-

justments are needed only when the mobile
phone featuring Bluetooth technology is
connected.

p Volume of the AV source is adjusted by the

Multi-control.
= For details, refer to Checking part names

and functions on page 11.

# If you touch the key next to “Beep”, the setting
is changed.

! On (default):

A beep sounds.

! Off:

The beep sound is muted.

4

To finish the setting, touch [OK].

Changing the preinstalled
splash screen

You can change the splash screen to the other
images preinstalled in the navigation system.

1

Display the

“System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 131.

2

Touch [Splash Screen].

The

“Select Splash Screen” screen appears.

3

Touch the image to use as the splash

screen from the list.
The image is displayed on the screen.

4

Touch [OK].

The image is set as the splash screen, and the
“System Settings” screen returns.

Changing to the splash screen
stored in the SD memory card

You can change the splash screen to other
images stored in the SD memory card. Copy
your chosen image to the SD memory card,
and select the image to import.
p Splash screen images should be used with-

in the following formats;
! BMP or JPEG files

! Allowable horizontal and vertical size

are 2 592 pixels x 1 944 pixels or smaller

! Allowable data size is 6 MB or smaller

p Proper compatibility with allowable files is

not guaranteed.

p Imported original images will be stored in

the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.

Engb

134

Chapter

26

Customising preferences

Advertising