Pioneer KRP-600A - Manual (Page 67)

Using with other equipment 12
67
En
E
n
glish
Note
• Some DVD/HDD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
• For details about connection and setting procedures, see the
operation manual that came with your DVD/HDD recorder
(DVR).
Switching the SCART output
Video and audio signals output from INPUT 2 and INPUT 3 sources
are the same as those used for the current image display. You can
however change the setting so that DTV/satellite TV signals are
always output regardless of the current image display.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “System Setup” ( / then ENTER).
4 Select “SCART Output” ( / then ENTER).
5 Select a desired parameter ( / then ENTER).
6 Press HOME MENU to exit the menu.
Note
• The following operations are given higher priority over the above
setting:
•Presetting a DTV/satellite TV programme for recording
•Execution of WYSIWYR (page 66)
• While in analogue TV mode, no signal is output even if “Fixed on
DTV/SAT” is selected for “SCART Output”.
• When the Home Media Gallery screen is displayed, no signal is
output even if “Fixed on DTV/SAT” is selected for “SCART
Output”.
Connecting a game console or
camcorder
Use the INPUT 5 terminals to connect a game console, camcorder
and other audiovisual equipment.
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or camcorder,
press INPUT 5 on the remote control unit or press INPUT on the
Media Receiver to select “INPUT 5”.
Note
• Connect external equipment to only terminals that are to be
actually used.
Item Description
Auto
(default) Outputs video and audio signals coming from the
selected input source
Fixed on
DTV/SAT Always outputs DTV/satellite TV signals
Auto
Fixed on DTV/SAT
CHANNEL
PHONES
USB HDMI
INPUT 5 VIDEO ANALOG RGB L AUDIO R
PC
KRP-M01
COMMON INTER
COMMON INTER
Audio/Video cable
Game console/camcorder
Media Receiver (front)
KRP-600A_500A.book Page 67 Monday, September 8, 2008 10:31 AM