Pioneer PD-10-K - Manual (Page 10)

Playback 04
10
En
Playing files stored on USB storage
devices
1 Press USB on the remote control
to select USB as the input source.
Press the remote control’s iPod/USB button
(PD-30) or press the remote control’s USB button
(PD-10).
• You can also perform the same operation by
pressing the FUNCTION on the front panel
repeatedly.
2 Connect the USB storage device.
3 Press the  button to begin playback.
• To pause playback, press the  button.
• To stop playback, press the  button.
You can perform the following operations. Note that
some buttons are not available for operation depending
on the category currently being played back.
When the auto power down function is set to ON, and
input is set for USB memory playback, if playback from
the USB memory device stops for 30 minutes without
other operation being performed, the power will
automatically switch to standby.
Note
• This unit may not recognize the USB storage
device, play files or supply power to the USB
storage device. For details, see Additional
information on page 12.
• Pioneer does not guarantee that any file recorded
on a USB storage device will play or that power will
be supplied to a USB storage device. Also note that
Pioneer will accept no responsibility whatsoever for
loss of files on USB storage devices caused by
connection to this unit.
• This unit does not support use of a USB hub.
USB storage device
(commercially available)
Button What it does
 Starts playback. During playback, pause/
unpause playback.
 Stops playback.
 Press to skip to the start of the current file,
then previous files.
 Press for fast reverse. Each time button is
pressed, reverse speed changes in four
steps.
 Press to skip to the next file.
 Press for fast forward. Each time button is
pressed, forward speed changes in four
steps.
RANDOM The currently selected files are played back
in random order (shuffle play).
REPEAT The currently selected files are played
repeatedly.
1
1 Each time you press REPEAT the repeat modes
changes as below.
Repeat 1  Repeat all  Normal playback
Repeat 1: Repeats a file currently played back.
Repeat all: Repeats all files.
iPod/USB
PD-30_PWSYXZT8.book 10 ページ ２０１２年５月７日 月曜日 午前１１時３３分